Huawei Quidway S6500 Series Operation Manual page 71

Operation Manual - VLAN
Quidway S6500 Series Ethernet Switches
Table 1-2 Relationship Between Broadcast Suppression Mode and LPU Type
Broadcast
Suppression Mode
VLAN
Suppression Mode
VLAN
Radio
Mode
The configuration of the suppression mode on the VLAN will overwrite the previously
configured mode.
Perform the following configuration in VLAN view.
Table 1-3 Set VLAN Broadcast Suppression Mode
Set VLAN broadcast suppression mode
Restore the default VLAN broadcast
suppression mode
By default, all broadcast traffic is allowed to pass through, that is, no broadcast
suppression will be performed.
1.2.3 Set/Delete VLAN or VLAN interface Description Character
You can use the following command to set/delete VLAN or VLAN interface description
character string or text.
Perform the following configuration in VLAN or VLAN interface view.
Table 1-4 Set/Delete VLAN or VLAN interface description character
Set the description character string for
VLAN or VLAN interface
Restore the default description of
current VLAN or VLAN interface
Type A LPU (LS81FT48A/
LS81FM24A/LS81FS24A/LS81GB
pps
Supported
Bandwidth
Suppression Supported
Operation
Operation
Huawei Technologies Proprietary
8UA/LS81GT8UA)
broadcast-suppression { ratio | pps
pps }
undo broadcast-suppression
description { string | text }
undo description
1-3
Chapter 1 VLAN Configuration
LPUs excluding
the type A LPUs
Unsupported
Unsupported
Command
Command