Operation Manual - Network Protocol
Quidway S6500 Series Ethernet Switches
2.4 Display and debug ARP
After the above configuration, execute display command in any view to display the
running of the ARP configuration, and to verify the effect of the configuration. Execute
debugging command in user view to debug ARP configuration. Execute reset
command in user view to clear ARP mapping table.
Table 2-5 Display and debug ARP
Display ARP mapping table
Display the ARP mapping table
containing specified text
Display the current setting of the
dynamic ARP map aging timer
Reset ARP mapping table
Enable
debugging
Disable
debugging
Operation
ARP
information
ARP
information
Huawei Technologies Proprietary
Command
display arp [ ip-address | dynamic | static ]
display arp | { begin | include | exclude } text
display arp timer aging
reset arp [ dynamic | static | interface
{
interface_type
interface_name } ]
debugging arp packet
undo debugging arp packet
2-5
Chapter 2 ARP Configuration
interface_num
|