Huawei Quidway S6500 Series Operation Manual page 293

Operation Manual - Multicast Protocol
Quidway S6500 Series Ethernet Switches
2.2.2 Enabling/Disabling GMRP on the Port
Perform the following configuration in Ethernet port view.
Table 2-2 Enabling/Disabling GMRP on the port
Enable GMRP on the port
Disable GMRP on the port
GMRP should be enabled globally before enabled on a port.
By default, GMRP is disabled on the port.
2.3 Displaying and debugging GMRP
After the above configuration, execute display command in any view to display the
running of the GMRP configuration, and to verify the effect of the configuration.
Execute debugging command in user view to debug GMRP configuration.
Table 2-3 Displaying and debugging GMRP
Display GMRP statistics.
Display GMRP global status.
Enable GMRP debugging
Disable GMRP debugging
2.4 GMRP Configuration Example
I. Networking requirements
Implement dynamic registration and update of multicast information between switches.
II. Networking diagram
Switch_A
Figure 2-1 GMRP networkin
Operation
Operation
g
Huawei Technologies Proprietary
gmrp
undo gmrp
Command
display gmrp statistics [ interface interface_list ]
display gmrp status
debugging gmrp { packet | event }
undo debugging gmrp { packet | event }
Switch_B
2-2
Chapter 2 GMRP Configuration
Command