Operation Manual - Routing Protocol
Quidway S6500 Series Ethernet Switches
Enable BGP packet debugging
Enable BGP Update packet debugging
Enable information debugging of BGP
normal functions.
Enable BGP Update packet debugging
Reset BGP flap information
6.4 Typical BGP Configuration Example
6.4.1 Configuring BGP AS Confederation Attribute
I. Networking requirements
Divide the following AS 100 into three sub-AS: 1001, 1002, and 1003, and configure
EBGP, confederation EBGP, and IBGP.
Operation
Huawei Technologies Proprietary
6-29
Chapter 6 BGP Configuration
Command
debugging bgp packet [ receive |
send ] [ verbose ]
debugging
bgp
[ receive | send ] [ verbose ]
debugging bgp normal
debugging bgp update [ receive |
send ] [ verbose ]
reset
bgp
[
regular-expression
as-regular-expression
acl-number | network-address [ mask ] ]
route-refresh
flap-info
|
as-path-acl