Set The Prompt Mode Of The File System; Configure File Management; Configure File Management Overview - Huawei Quidway S6500 Series Operation Manual

Operation Manual - System Management
Quidway S6500 Series Ethernet Switches
Table 1-3 Storage device operation
Format the storage device

1.1.5 Set the Prompt Mode of the File System

The following command can be used for setting the prompt mode of the current file
system.
Perform the following configuration in system view.
Table 1-4 File system operation
Set the file system prompt mode.

1.2 Configure File Management

1.2.1 Configure File Management Overview

The management module of configuration file provides a user-friendly operation
interface. It saves the configuration of the Ethernet switch in the text format of
command line to record the whole configuration process. Thus you can view the
configuration information conveniently.
The format of configuration file includes:
It is saved in the command format.
Only the non-default constants will be saved
The organization of commands is based on command views. The commands in
the same command mode are sorted in one section. The sections are separated
with a blank line or a comment line (A comment line begins with exclamation mark
"#").
Generally, the sections in the file are arranged in the following order: system
configuration, ethernet port configuration, vlan interface configuration, routing
protocol configuration and so on.
It ends with "end".
The management over the configuration files includes:
Display the Current-configuration and Saved-configuration of Ethernet Switch
Save the Current-configuration
Erase configuration files from Flash Memory
Operation
Operation
Huawei Technologies Proprietary
1-3
Chapter 1 File System Management
Command
format filesystem
Command
file prompt { alert | quiet }