Huawei Quidway S6500 Series Operation Manual page 461

Operation Manual - Security
Quidway S6500 Series Ethernet Switches
On the switch, use the following command to enable this function and to configure
the remaining-online-time threshold (the limit argument) and the alert message
interval.
If the threshold is reached, the switch sends messages containing the user's
remaining online time to the client at the interval you configured.
The client keeps the user informed of the updated remaining online time through a
dialog box.
Perform the following configuration in ISP domain view.
Table 2-8 Enabling/disabling message alert
Enable messenger alert and configure the
remaining-online-time threshold and the interval
at which the alert message is sent
Disable messenger alert
Restore the messenger alert as the default
setting
By default, messenger alert is disabled on the switch.
VIII. Configuring Self-Service Server URL
The self-service-url enable command can be used to configure self-service server
uniform resource locator (URL). This command must be incorporated with a RADIUS
server (such as a CAMS server) that supports self-service. Self-service means that
users can manage their accounts and card numbers by themselves. And a server with
the self-service software is called a self-service server.
Once this function is enabled on the switch, users can locate the self-service server and
perform self-management through the following operations:
Select "Change user password" on the 802.1x client.
After the client opens the default explorer (IE or NetScape), locate the specified
URL page used to change the user password on the self-service server.
Change user password on this page.
Perform the following configuration in ISP domain view.
Operation
Huawei Technologies Proprietary
2-8
Chapter 2 AAA and RADIUS Protocol
Command
messenger time enable limit
interval
messenger time disable
undo messenger time
Configuration