IGMP
IGMP S
C
AND
NOOPING
OMMANDS
IP IGMP
ip igmp
Overview
Use this command to enable IGMP on an interface. The command configures the
device as an IGMP querier.
Use the no variant of this command to return all IGMP related configuration to the
default on this interface.
Syntax
ip igmp
no ip igmp
Default
Disabled
Mode
Interface Configuration for a VLAN interface.
Usage
An IP address must be assigned to the interface first, before this command will
work.
Example
To specify an interface as an IGMP querier, use the commands:
awplus#
awplus(config)#
awplus(config-if)#
Validation
show ip igmp interface
Commands
show running-config
C613-50170-01 Rev B
configure terminal
interface vlan2
ip igmp
Command Reference for x510 Series
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
1196