Match Ip Next-Hop - Allied Telesis x510-28GTX Command Reference Manual

R M C
OUTE AP OMMANDS
-
MATCH IP NEXT HOP

match ip next-hop

Overview Use this command to add a next-hop match clause to a route map entry. You can
specify the next hop to match by either:
•
•
A route matches the route map if the route's next hop matches the access list or
prefix list.
Each entry of a route map can have at most one access list-based next-hop match
clause and one prefix list-based next-hop match clause. If the route map entry
already has one of these match clauses, entering this command replaces that
match clause with the new clause.
Note that access lists, prefix lists and route map entries all specify an action of deny
or permit. The action in the access list or prefix list determines whether the route
map checks update messages and routes for a given next-hop value. The route
map action and its set clauses determine what the route map does with update
messages and routes that contain that next hop.
Use the no variant of this command to remove the next-hop match clause from a
route map entry. To remove a prefix list-based match clause you must also specify
the prefix-list parameter.
Syntax match ip next-hop {<accesslistID>|prefix-list
<prefix-listname>}
no match ip next-hop [<accesslistID>]
no match ip next-hop prefix-list [<prefix-listname>]
Mode Route-map Configuration
Usage This command is valid for:
•
C613-50170-01 Rev B
specifying the name of an access list. To create the access list, enter Global
Configuration mode and use the access-list command.
specifying the name of a prefix list. To create the prefix list, enter Global
Configuration mode and use the ip prefix-list command.
Parameter
<accesslistID>
<access-list-name> The IP access list name.
<1-199>
<1300-2699>
prefix-list
<prefix-listname>
OSPF routes
Command Reference for x510 Series
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
Description
{<access-list-name>|<1-199>|<1300-2699>}
The IP access list name or number.
The IP access list number.
The IP access list number (expanded range).
Use an IP prefix list to specify which next hop to match.
The prefix list name.
1175