Show Mls Qos - Allied Telesis CentreCOM FS980M/9 Command Reference Manual

Q S C
O OMMANDS

SHOW MLS QOS

show mls qos
Overview Use this command to display whether QoS is enabled or disabled on the switch.
show mls qos
Syntax
Mode User Exec and Privileged Exec
Example To display whether QoS is enabled or disabled, use the command:
awplus#
Output Figure 27-3: Example output from the show mls qos command
Related mls qos enable
Commands
613-50157-01 Rev C
show mls qos
awplus#show mls qos
Enable
Command Reference for FS980M Series
AlliedWare Plus™ Operating System - Version 5.4.7-0.x
885