OSPF
3
IP
6 C
V
FOR
V
OMMANDS
6
-
SHOW IPV
OSPF VIRTUAL
LINKS
show ipv6 ospf virtual-links
Overview
Use this command in User Exec or Privileged Exec modes to display virtual link
information, including OSPFv3 Authentication status for virtual links.
For information on filtering and saving command output, see the
with AlliedWare Plus" Feature Overview and Configuration
Syntax
show ipv6 ospf virtual-links
Mode
User Exec and Privileged Exec
Usage
See the
and examples.
Examples
To display virtual link information, use the command:
awplus#
Output
Figure 28-17: Example output from the show ipv6 ospf virtual-links command
Related
area virtual-link authentication ipsec spi
Commands
area virtual-link encryption ipsec spi
C613-50170-01 Rev B
OSPFv3 Feature Overview and Configuration Guide
show ipv6 ospf virtual-links
showing OSPFv3 Authentication configuration information
highlighted in bold
awplus#show ipv6 ospf virtual-links
Virtual Link VLINK1 to router 192.168.1.10 is down
Transit area 0.0.0.1 via interface *, instance ID 0
Local address
Remote address
MD5 Authentication SPI 1000
NULL encryption SHA-1 auth SPI 1001
Transmit Delay is 1 sec, State Down,
Timer intervals configured, Hello 10, Dead 40, Wait 40,
Retransmit 5
Hello due in inactive
Adjacency state Down
Command Reference for x510 Series
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
"Getting Started
Guide.
for more information
1159