Table of Contents
Advertisement
x950 Series Installation Guide for Standalone Switches
Rack Mount Kit Components
The kit has three main components.
Adjustable Outer
Two adjustable outer rails attach to the equipment rack. They are suitable
for racks with depths of 600 mm (23.6 in) to 900 mm (35.4 in). Refer to
Rails
Figure 82.
Figure 82. Outer Rails
Inner Rails
Two Inner rails attach to the sides of the switch. Refer to Figure 83.
Figure 83. Inner Rails
Extension
Two extension brackets attach to the front of the inner rails and control the
amount the switch is recessed in the equipment rack. The brackets also
Brackets
have a captive screw for securing the switch in the equipment rack. Refer
to Figure 84 on page 138.
137
Advertisement
Table of Contents
