Table of Contents
Advertisement
Rack Mount Kit Components
Adjustable Outer
Rails
Inner Rails
Note
The illustrations in this chapter show a generic switch, but the
installation procedures are the same for similar switches.
The kit has three main components.
Two adjustable outer rails attach to the equipment rack. They are suitable
for racks with depths of 600 mm (23.6 in) to 900 mm (35.4 in). Refer to
Figure 39.
Two Inner rails attach to the sides of the switch. Refer to Figure 40.
x530DP Series Installation for Standalone Switches
Figure 39. Outer Rails
Figure 40. Inner Rails
141
Advertisement
Table of Contents
