Table of Contents
Advertisement
SNMP C
OMMANDS
-
SHOW SNMP
SERVER
show snmp-server
Overview
This command displays the status and current configuration of the SNMP server.
show snmp-server
Syntax
Mode
Privileged Exec
Example
To display the status of the SNMP server, use the command:
awplus#
Output
Figure 54-4: Example output from the show snmp-server command
SNMP Server .......................... Enabled
IP Protocol .......................... IPv4
SNMPv3 Engine ID (configured name) ... Not set
SNMPv3 Engine ID (actual) ............ 0x80001f888021338e4747b8e607
Related
debug snmp
Commands
show counter snmp-server
snmp-server
snmp-server engineID local
snmp-server engineID local reset
C613-50103-01 REV A
show snmp-server
Command Reference for x310 Series
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
2280
Advertisement
Table of Contents
