NTP C
OMMANDS
SHOW NTP STATUS
show ntp status
Overview
Use this command to display the status of the Network Time Protocol (NTP).
show ntp status
Syntax
Mode
User Exec and Privileged Exec
Example
To see information about NTP status, use the command:
awplus#
For information about the output displayed by this command, see ntp.org.
Figure 53-3: Example output from the show ntp status command
C613-50103-01 REV A
show ntp status
awplus#show ntp status
associd=0 status=061b leap_none, sync_ntp, 1 event, leap_event,
system peer: 10.37.211.97:123
system peer mode:
leap indicator:
stratum:
log2 precision:
root delay:
root dispersion:
reference ID:
reference time:
system jitter:
clock jitter:
clock wander:
broadcast delay:
symm. auth. delay:
Command Reference for x310 Series
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
client
00
4
-19
24.234
113.912
10.37.211.97
daad77a3.846d4632 Mon, Apr 4 2016 23:30:43.517
3.603336
3.292
0.601
0.000
0.000
2270