Table of Contents
Advertisement
NTP C
OMMANDS
SHOW NTP COUNTERS
show ntp counters
Overview
This command displays packet counters for NTP.
show ntp counters
Syntax
Mode
User Exec and Privileged Exec
Example
To display counters for NTP use the command:
awplus#
Figure 53-1: Example output from show ntp counters
Table 53-1: Parameters in the output from show ntp counters
C613-50103-01 REV A
show ntp counters
uptime:
sysstats reset:
packets received:
current version:
older version:
bad length or format:
authentication failed:
declined:
restricted:
rate limited:
KoD responses:
processed for time:
Parameter
Description
uptime
How long NTP has been running since it was last restarted, in
seconds.
sysstats reset
How long since
seconds.
packets
Total number of NTP client and server packets received by the
received
device.
current
The number of version 4 NTP packets received.
version
older version
The number of NTP packets received that are from an older
version, down to version 1, of NTP. NTP is compatible with these
versions and processes these packets.
bad length or
The number of NTP packets received that do not conform to the
format
standard packet length. NTP drops these packets.
Command Reference for x310 Series
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
7212
7212
307
237
69
0
0
0
0
0
0
306
show ntp status
information was last reset, in
2266
Advertisement
Table of Contents
