Table of Contents
Advertisement
SNMP C
OMMANDS
-
SNMP
SERVER LOCATION
snmp-server location
Overview
This command sets the location of the system. The location is:
•
•
The no variant of this command removes the configured location from the system.
snmp-server location <location-name>
Syntax
no snmp-server location
Mode
Global Configuration
Example
To set the location to "server room 523", use the following commands:
awplus#
awplus(config)#
Related
show snmp-server
Commands
show system
snmp-server contact
C613-50103-01 REV A
displayed in the output of the
stored in the MIB object sysLocation
Parameter
<location-name>
configure terminal
snmp-server location server room 523
Command Reference for x310 Series
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
show system
Description
The location of the system, from 0 to 255 characters long. Valid
characters are any printable character and spaces.
command
2304
Advertisement
Table of Contents
