Snmp Commands; Introduction - Allied Telesis x310-26FT Command Reference Manual

54

Introduction

Overview This chapter provides an alphabetical reference for commands used to configure
SNMP. For more information, see:
•
•
For information on filtering and saving command output, see the
with AlliedWare Plus" Feature Overview and Configuration
Command List •
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
C613-50103-01 REV A

SNMP Commands

the Support for Allied Telesis Enterprise_MIBs in AlliedWare
information about which MIB objects are supported.
the SNMP Feature Overview and
"debug snmp" on page 2273
"show counter snmp-server" on page 2274
"show debugging snmp" on page 2278
"show running-config
"show snmp-server" on page 2280
"show snmp-server community" on page 2281
"show snmp-server group" on page 2282
"show snmp-server user" on page 2283
"show snmp-server view" on page 2284
"snmp trap link-status" on page 2285
"snmp trap link-status
"snmp-server" on page 2289
"snmp-server community" on page 2291
"snmp-server contact" on page 2292
"snmp-server enable trap" on page 2293
"snmp-server engineID
Command Reference for x310 Series
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
Configuration_Guide.
snmp" on page 2279
suppress" on page 2287
local" on page 2296
Plus, for
"Getting Started
Guide.
2271