Air Bag Module And Related Components - SSANGYONG ACTYON SPORTS Instruction

Air bag
Hide thumbs Also See for ACTYON SPORTS:
Table of Contents

Advertisement

02-12
8810-03

3. AIR BAG MODULE AND RELATED COMPONENTS

This section describes the air bag module installed in ACTYON. The module consists of the
inflator, the cushion, and the mounting cover.
1) DAB (Driver Air Bag)
The driver's air bag is installed inside the steering wheel. If the acceleration sensor (inside the
air bag unit) is activated by the deceleration from vehicle collision, the detonation is fired by the
electrical signal of the air bag unit.
Then, the detonation sets off explosives and nitrogen gas is generated.
At this point, the air bag very quickly deploys and the gas is emitted from the relieving hole to
absorb impact upon the driver.
(1) Components
AIR BAG
ACTYON SPORTS 2010.01
Front View
1.
Air bag cover
2.
Air bag housing
3.
Air bag cushion (approx. 50 liters)
4.
Inflator* (approx. 190 Kpa)
5.
Retainer ring
6.
Horn switch
Inflator*
The inflator is composed of the detonator,
explosives, and the gas generator.
It inflates air bag when vehicle collides.
Rear View

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents