Table of Contents
Advertisement
38.6.5
Description
COGO
Intersection with TPS Observation - TPS Observation
The COGO intersection calculation TPS observation - TPS observation calculates the inter-
section point of two lines. A line is defined by a TPS station and a TPS measurement from
this station.
Elements that must be known are
•
the coordinates of two points.
•
azimuths of the lines.
The coordinates of the known points
•
must be taken from the active job.
•
must be TPS station points.
The azimuths of the lines
•
must be TPS measurements from the known points.
Points with full coordinate triplets and position only points can be used.
GPS1200+
854
Advertisement
Table of Contents
