Viewing The Running Configuration - Avaya P580 User Manual

Multiservice switches

Hide thumbs Also See for P580:

Table of Contents

Viewing the Running Configuration

Any changes you make to the switch configuration are automatically

recorded in RAM, but not in NVRAM. When you want to retain your

current configuration, you must manually save it to NVRAM through the

Web Agent or the CLI.

For information about how to save your running configuration file to your

startup configuration, see

chapter. Always view and compare your running and startup configuration

files to determine changes that you made to your running configuration.

* Important: Do not copy the startup configuration to the running

configuration. The switch does not support this

activity. If you need to reapply the startup

configuration, restart the switch.

* Note: If you initialize NVRAM (nvram initialize command), all

switch settings except the following are reset to their default:

Startup image

48-port mode

You can manage the files that contain the configuration data for your

multiservice switch from either the Web Agent or the CLI.

You must have administrator access to view the running configuration.

To view the running configuration:

1. In the navigation pane, expand the System > Configuration >

Configuration Files folders.

2. Click Running Config. The Running Configuration Web page is

displayed in the content pane.

To view the running configuration, use the following CLI command:

# show running-config

User Guide for the Avaya P580 and P882 Multiservice Switches, v6.0

"Copying Configuration

Files" later in this