Table of Contents
Advertisement
Chapter 7
Cajun Campus CLI - Layer 3
Example:
Router-N> copy running-config tftp c:\p333r\router1.cfg
192.168.49.10
copy running-config startup-config Command
Use the copy running-config startup-config command to copy the
P333R configuration from the current VRAM Running Configuration to the Startup
Configuration NVRAM.
copy startup-config tftp Command
Use the copy startup-config tftp command to copy the P333R
configuration from the NVRAM Startup Configuration to the TFTP file.
The syntax for this command is:
copy startup-config tftp <filename> <ip>
filename
ip
Example:
Router-N> copy startup-config tftp c:\p333r\router1.cfg
192.168.49.10
erase startup-config Command
The erase startup-config command erases the P333R module NVRAM
configuration.
The syntax for this command is:
erase startup-config
event log Command
The event log command display a list of the P333R event messages. The event
messages shown are encrypted and are reserved for Avaya technician use only.
The syntax for this command is:
event log [<num>]
num
154
file name (full path)
The ip address of the host
Number of event messages to display (max=30)
Avaya P333R User's Guide
Advertisement
Table of Contents
