avaya.com
2.2.5 Configuring the Circuitless (CLIP) interfaces
CLIP#2: 172.16.3.254/24
CLIP#1: 10.0.0.3/32
GRT
Site3
CLIP#3: 172.16.0.254/24
CLIP#3: 172.16.0.254/24
CLIP#2: 172.16.1.254/24
CLIP#2: 172.16.2.254/24
CLIP#1: 10.0.0.2/32
CLIP#1: 10.0.0.1/32
Site2
Site1
IST MLT
CLIP#2: 172.16.4.254/24
CLIP#2: 172.16.5.254/24
CLIP#1: 10.0.0.4/32
CLIP#1: 10.0.0.5/32
Site4
Site5
Figure 13: CLIP interfaces on GRT
2.2.5.1
CLIP#1 Configuration
CLIP#1 will be used for IBGP peering as well as BGP & OSPF router-id and Autotopology
Site 1
CLI
Site1:5# config ip circuitless-ip-int 1 create 10.0.0.1/32
ACLI
Site1:5(config)# interface loopback 1
Site1:5(config-if)# ip address 10.0.0.1/32
Site1:5(config-if)# exit
Site 2
CLI
Site2:5# config ip circuitless-ip-int 1 create 10.0.0.2/32
ACLI
Site2:5(config)# interface loopback 1
Network Design Implementation to Provide L2 & L3 VPN Connectivity
36
November 2010
between Sites using SMLT and IPVPN-Lite for ERS 8600
Technical Configuration Guide