Clear ip route Command
Use the clear ip route command to delete IP routing table entries.
The syntax for this command is:
clear ip route <destination> <gateway>
destination
gateway
Example:
To delete the route table entries using the clear ip route command:
Cajun_P330-N# clear ip route 134.12.3.0 192.1.1.1
Route deleted.
Clear snmp trap Command
Use the clear snmp trap command to clear an entry from the SNMP trap
receiver table.
The syntax for this command is:
clear snmp trap {<rcvr_addr>|all}
rcvr_addr
all
Example:
Cajun_P330-N# clear snmp trap 192.122.173.82
SNMP trap receiver deleted.
Clear vlan Command
Use the clear vlan command to delete an existing VLAN and return ports from
this VLAN to the default VLAN #1. When you clear a VLAN, all ports assigned to
that VLAN are assigned to the default VLAN #1.
The syntax for this command is:
clear vlan <vlan-id>[name <vlan_name>]
vlan_id
Avaya P333T User's Guide
IP address of the network, or specific host to be added
IP address of the router.
IP address or IP alias of the trap receiver (the SNMP management
station) to clear.
Keyword that specifies every entry in the SNMP trap receiver table
Number of the VLAN (range is 1to 3071).
Chapter 6
Cajun Campus CLI – Layer 2
73