Connecting A Transceiver To The Switch Or Switch Stack - Avaya 5000 Series Installing

Ethernet routing switch
Hide thumbs Also See for 5000 Series:
Table of Contents

Advertisement

Installation fundamentals
Required cable
Console Port
Shared SFP Transceiver
Ports
XFP Transceiver Ports
USB Ports
Important:
In Autonegotiation mode, the Ethernet Routing Switch 5000 Series switches automatically
provide the proper MDI/MDI-X connection on the RJ-45 ports; thereby eliminating the need
for crossover cables. When Autonegotiation is disabled on 10/100 ports, they are configured
as an MDI-X connection.

Connecting a transceiver to the switch or switch stack

The following sections describe small form factor pluggable (SFP) transceivers in the Ethernet
Routing Switch 5000 Series. For installation and removal procedures, see Installing
Transceivers and Optical Components on Avaya Ethernet Routing Switch 5000 Series,
NN47200–302.
Understanding transceiver connections
The following sections describe transceiver connections.
Small form factor pluggable (SFP) transceivers interface a device motherboard to a fiber optic
or unshielded twisted pair network cable. The SFPs described in this section provide Ethernet
at 1 gigabit per second (Gbit/s).
Select the appropriate transceiver to provide the required reach. SFPs are available for cable
distances of up to 100 meters (m), 550 m, 10 kilometers (km), 40 km, 70 km, and 120 km. Any
reach over 100 m requires fiber optic cable.
SFPs are hot-swappable input/output enhancement components designed for use with Avaya
products to allow Gigabit Ethernet ports to link with other Gigabit Ethernet ports over various
media types.
24
Installing Avaya Ethernet Routing Switch 5000 Series
Serial cable with a DB-9 female connector on both ends.
The maximum length for the console port cable is 25 feet
(8.3 meters).
Varies with the installed SFP Transceiver. Refer to the
documentation that was shipped with the SFP Transceiver
for specifications.
Varies with the installed XFP Transceiver. Refer to the
documentation that was shipped with the XFP Transceiver
for specifications.
USB 2.0 compliant cable with a USB Type A connector on
both ends.
Comments? infodev@avaya.com
Description
December 2013

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

5632fd5650td5650td-pwr5698tfd5698tfd-pwr

Table of Contents