Displaying The Arp Cache Table; Deleting Specific Arp Cache Entries; Requesting Snmp Walk Results - Avaya Virtual Services Platform 7000 Series Troubleshooting Manual

2. Enter the ip routing command.

Displaying the ARP cache table

Display and observe ARP cache table entries.
Procedure
1. Log on to ACLI to enter User EXEC mode.
2. Enter the show ip arp command.
3. Observe the ARP cache table entries.

Deleting specific ARP cache entries

You can delete one or more specific entries from the ARP cache table if required.
Procedure
1. Enter Global Configuration mode:
enable
configure terminal
2. Enter the no ip arp <A.B.C.D> command to delete an entry.
3. Repeat step 2 for other entries as required.

Requesting SNMP walk results

Use the EDM MIB Web Page tab to request and observe SNMP walk results for specific MIB
objects.
About this task
SNMP walk results can assist with the diagnosis of ARP forwarding issues.
Procedure
1. From the navigation tree, double-click Administration.
2. In the Administration tree, click MIB Web Page.
3. In the MIB Walk work area, request and observe SNMP walk results for the following MIB
objects:.
• ipNetToMediaIfIndex
• ipNetToMediaPhysAddress
• ipNetToMediaNetAddress
July 2015
Comments on this document? infodev@avaya.com
ARP does not forward traffic correctly
Troubleshooting Avaya VSP 7000 Series
71