Installing The Queue Warning Indicator - Avaya S8500 Manual

Installing and wiring telephones and trunks
Figure 103: 3-pair and 4-pair modularity
Figure notes
1 Port Circuit Pack
2 Media Gateway Connector Pins
(3-Pair Modularity)
3 Main Distribution Frame (MDF)
Pins (3-Pair Modularity)

Installing the queue warning indicator

The connections for the queue warning indicator are the same as external ringing. An AC indicator
(lamp) such as a 21C49 can be used in a uniform call distribution/direct departmental calling
(UCD/DDC) queue.
The lamp is connected to an information outlet. The media gateway side of the MDF is connected to an
analog line circuit pack located in a port carrier.
•
Wire the queue warning indicator to the information outlet as shown in
pair modularity,
266
on page 266 and
Installing the Avaya S8500 Media Server with an Avaya G650 Media Gateway
4 Input to Information Outlet
(4-Pair Modularity)
5 Adjunct Power
6 Output From Information Outlet
(4-Pair Modularity)
7 Voice or Data Terminal Pins
Figure 95, Example adjunct power connections,
Figure 103, 3-pair and 4-
on page 246.
December 2003