Toyota T100 1996 Service Manual page 552

DI−288
INSPECTION PROCEDURE
1 Check ATF Temperature Sensor.
OK
2 Check harness and connector between ATF temperature sensor and ECM
(See page IN−26).
OK
Check and replace ECM.
1996 TOYOTA T100 (RM449U)
DIAGNOSTICS − AUTOMATIC TRANSMISSION
PREPARATION:
Remove the ATF temperature sensor.
CHECK:
Measure resistance between terminals of ATF temperature
sensor at 20°C (68°F) and 110°C (230°F).
OK:
Resistance:
20°C (68°F): Approx. 13.0 kΩ
110°C (230°F): Approx. 800 Ω
Q07637
NG Replace ATF temperature sensor.
NG Repair or replace harness or connector.