Show Captive-Portal Firewall - Juniper JUNOS OS 10.4 - FOR EX REV 1 Manual

For ex series ethernet switches
Table of Contents

Advertisement

show captive-portal firewall

Syntax
Release Information
Description
Options
Required Privilege
Level
Related
Documentation
List of Sample Output
Output Fields
show captive-portal
show captive-portal
firewall brief
firewall brief
show captive-portal
firewall ge-0/0/10.0
Copyright © 2010, Juniper Networks, Inc.
show captive-portal firewall
<brief | detail>
<interface-name>
<interface-name detail>
Command introduced in Junos OS Release 10.1 for EX Series switches.
Display information about the firewall filters for each user that is authenticated on each
captive portal interface.
—Display all the firewall filters on all captive portal interfaces.
none
—(Optional) Display the specified level of output.
brief | detail
—(Optional) Display all the terms of the firewall filters for the specified
interface-name
interface.
interface-name detail
—(Optional) Display all of the terms of the firewall filters for the
specified interface.
view
show captive-portal authentication-failed-users on page 2972
show captive-portal interface on page 2975
clear captive-portal on page 2966
Example: Setting Up Captive Portal Authentication on an EX Series Switch on page 2821
Configuring Captive Portal Authentication (CLI Procedure) on page 2848
show captive-portal firewall brief on page 2973
show captive-portal firewall ge-0/0/10.0 on page 2973
show captive-portal firewall on page 2974
Output fields for the
show captive-portal firewall
specified in firewall filters except policers. Policers are not supported in the terms of the
internally generated dynamic firewall filters that are created when multiple supplicants
authenticate on 802.1X-enabled interfaces.
user@switch> show captive-portal firewall brief
Captive Portal Information:
Interface
State
ge-0/0/1.0
Connecting
ge-0/0/10.0
Connecting
user@switch> show captive-portal firewall ge-0/0/10.0
Filter name: dot1x_ge-0/0/10
Counters:
Chapter 92: Operational Commands for Access Control
command include any action modifier
MAC address
User
00:30:48:8c:66:bd
No User
2973

Advertisement

Table of Contents
loading

This manual is also suitable for:

Junos os 10.4

Table of Contents