Unframed; Unidirectional - Juniper JUNOS 10.1 - CONFIGURATION GUIDE 1-2010 Configuration Manual

JUNOS 10.1 Network Interfaces Configuration Guide

unframed

(unframed | no-unframed);
Syntax
[edit interfaces interface-name e3-options]
Hierarchy Level
Statement introduced before JUNOS Release 7.4.
Release Information
For E3 IQ interfaces only, enable or disable unframed mode. In unframed mode, the
Description
E3 IQ interface do not detect yellow (
Unframed mode is disabled.
Default
interface—To view this statement in the configuration.
Required Privilege Level
interface-control—To add this statement to the configuration.
Related Topics

unidirectional

unidirectional;
Syntax
[edit interfaces interface-name],
Hierarchy Level
[edit logical-systems logical-system-name interfaces interface-name]
Statement introduced in JUNOS Release 8.5.
Release Information
Create two new, unidirectional (transmit-only and receive-only) physical interfaces
Description
subordinate to the original parent interface. Unidirectional links are currently
supported only on 10-Gigabit Ethernet interfaces on the following hardware:
Disabled.
Default
interface—To view this statement in the configuration.
Required Privilege Level
interface-control—To add this statement to the configuration.
Related Topics
1500
unframed
Configuring E3 IQ and IQE Unframed Mode on page 576
4-port 10-Gigabit Ethernet DPC on the MX960 router
10–Gigabit Ethernet IQ2 PIC and 10–Gigabit Ethernet IQ2E PIC on the T Series
router
Enabling Unidirectional Traffic Flow on Physical Interfaces on page 151
) or loss-of-frame ( ) alarms.
ylw lof