Change Network Night Routing Tables - Northern Telecom NAC User Manual

Change Network Night Routing Tables

The Change Network Night Routing Tables feature allows changes to be
made to the night target table for each NACD queue. This table is used to
route incoming calls when the queue is in night service. A night target table
cannot be defined for a queue which has a night number defined (although
this is not checked until the network configuration control change is
executed at the remote Meridian MAX system).
This feature specifies the source NACD-DN, up to 20 target NACD-DNs,
and the number of seconds the call should wait in the queue before it sends
a call request to the next target NACD-DN. All the Target and Time fields
must be completed in a column before entries can be made in the next
column.
Note: When defining night routes, do not select CDNs as either source
or destination DNs for the purpose of rerouting calls. The Meridian
MAX does not include any CDNs in the lists sent to the NAC for use
in configuration control operations.
Figure 12-3
Network Configuration Control—Night Tables
Network Configuration Control – Night Tables
NACD-DN ––Target–– Time ––Target–– Time ––Target–– Time
255– 500 4082221000 60 4082221007 240
4082221001 60
4082221002 60
4082221003 60
4082221004 60
4082221005 60
4082221006 60
255– 501 Empty
HELP=Help PF1=Commands PF2=Options F10=Display Execution Queue
Network Administration Center Supervisor's User Guide Product release 2
Network Configuration Control 12-9
12:00:00
F20=>>