Table of Contents
Advertisement
15-20 Parameter Administration
Fields
P0724352 Standard 1.0
Save changes and exit
Saves the changes and returns the system to the Parameter
Administration submenu.
PF1=Select no command
Removes the Commands pop-up window from the screen.
PF2=Options
Displays a description or list of valid entries for the field.
PF2=Remove options pop-up
Removes the Options pop-up window from the screen.
Node Addr
Represents the network address assigned to the switch at installation.
Node Name
Provides the descriptive name assigned to the node. It can be changed only
during installation or when the system is shut down.
Short Name
Provides the abbreviated name for the node. It can only be changed during
installation or when the system is shut down.
Time Zone
Shows the difference between the time at the nodal site and the NAC site.
The value must be between –12.0 and +12.0 in .5 hour units. The contents
can only be changed during installation or when the system is shut down.
For example, if the NAC site is in New York, and the nodal site is in Los
Angeles, -3.0 appears as the time zone because there are three hours
difference between Eastern Time and Pacific Time. If the NAC site is in
Los Angeles and the nodal site is in New York, the entry would be 3.0.
Node Type
Provides the type of network node. Currently, the only type supported is
Meridian MAX. The contents of the field are obtained during initialization
and cannot be changed. If the system fails to connect the NAC to the node,
this field remains blank. If a connected node is disconnected, this field
displays the last known type for the node.
November 1994
Advertisement
Table of Contents
