Table of Contents
Advertisement
Options function key
Report status indicator
Windows
Keyboard
Field options come in two forms:
a pop-up menu from which a particular option can be selected
a paragraph, describing the type of input required for the field (as
shown in Figure 2-2).
Press [Options] to display the available options or a description of the
field. Press [Options] again to remove the options display.
If the NAC is commanded to display an ad hoc report, the status is
indicated by the report status indicator. It is removed after the requested
report is viewed or deleted. Ad hoc reports sent to the printer do not use the
report status indicator. For more information, refer to the "Report Preview"
chapter.
Windows are separate areas which can appear within an existing screen.
They are used to display information such as help messages, and provide a
work area where information can be displayed. Windows always appear
over the screen information.
The keyboard is similar to a typewriter keyboard but contains several extra
keys that perform special functions.
The following keyboard figures show the positions of these keys on the
four keyboards supported by the NAC. Figure 2-4 shows the PC Enhanced
style keyboard, Figure 2-5 shows the PC/AT style keyboard, Figure 2-6
shows the VT220 English keyboard, and Figure 2-7 shows the VT420
English keyboard. Some variations occur between the different keyboards.
Any of the characters in the Latin-1 character set can be entered as part of
textual input. To create international characters which are unavailable on
the keyboard, a special key sequence must be entered. However, problems
with information sorting, such as queue names in a report or on the screen,
may result. For more information on international characters, refer to the
"International language support" chapter.
Network Administration Center Supervisor's User Guide Product release 2
The NAC workstation 2-13
Advertisement
Table of Contents
