Function Keys - Northern Telecom NAC User Manual

Function keys

Note: The display and purpose of several of the function keys vary
depending on the feature from which the [Configuration Control]
command was invoked. For example, pressing [Commands] may
display a Commands pop-up on one screen or be used to return to the
main menu on the other. The purpose of all the function keys are
provided in this section.
Help=Help
Provides information regarding this feature and its fields.
PF1=Commands
The following options are available under the [Commands] function key if
[Configuration Control] is invoked from the Network ACD-DN Queue
Statistics feature:
Exit
Returns the system to the main menu.
NACD-DN Queue Statistics Display
Provides access to the Network ACD-DN Queue Statistics display, if
this option is highlighted.
CDN Queue Statistics Display
Provides access to the Nodal Control DN Queue Statistics. This
command is only offered if the CCR/EAR option is enabled. The CDN
Statistics must also be enabled in the supervisor's profile.
PF1=Commands
The following options are available under the [Commands] function key if
[Configuration Control] is invoked from the Network Details Display
feature:
Exit
Returns the system to the Network Details Display screen.
Remove changes
Ignores any changes made to the day table during the current session.
Execute
Executes the Network Configuration Control–Day Tables. The
information is sent to the execution queue.
Refresh display
Redraws the screen.
Network Administration Center Supervisor's User Guide Product release 2
Network Configuration Control ad hoc mode 13-3