Table of Contents
Advertisement
2-10 The NAC workstation
Command menu
P0724352 Standard 1.0
Figure 2-3
Common screen elements (part 3)
Network Configuration Control
1. Exit
2. Change Network Day Routing Tables
3. Change Network Night Routing Tables
Help System
Network Configuration Control Menu
This is the Network Configuration Control Menu. To select one of the
options displayed, use the up and down arrows to highlight the appropriate
option, or type the number corresponding to that option, and press ENTER.
The Exit option takes you back to the Main Menu.
The Change Day Routing Tables and Change Night Routing Tables option let
HELP=Exit help
Note: The sample screens in this document are taken from VT420
workstations. There are slight differences between these samples and
the screens of different workstations.
The command menu offers a list of commands relevant to the screen being
used. Press [Commands] to display a command menu. Press [Commands]
again to remove the menu without choosing a command. It is possible to
use the selections in the command menu without displaying it each time.
This is done by entering the menu number of the command and pressing
[Commands]. For example, the first command on most command menus is
'1. Exit...'. Pressing 1 and then [Commands] causes the system to return to
the previous screen.
November 1994
12:00:00
Help
message
Advertisement
Table of Contents
