Table of Contents
Advertisement
Report Preview
Accessing this feature
Screen messages
The Report Preview feature allows the report most recently generated from
the workstation to be displayed on the screen. The parameters, used to
create the report, can also be viewed.
This feature can be accessed from the main menu or the Report Parameter
Definition feature (described in the "Network Report Definition" chapter).
To preview a report from the Report Parameter Definition feature, "VDT"
must be selected in the Output Device field.
Several messages appear on the screen if a report is previewed from the
Report Parameter Definition feature. These messages include:
Report Pending
Indicates that the requested report is being generated.
Report Ready
Indicates that the report is ready to be displayed. Press [Report
Preview] to display the report on the screen.
Report Failed
Indicates that a problem occurred while the report was being prepared.
The following line appears near the bottom left of the screen to indicate
which portion of the report is on display:
Line nn of mm
The value,
, represents the line at the top of the screen and
nn
total number of lines in the report.
Network Administration Center Supervisor's User Guide Product release 2
8-1
is the
mm
Advertisement
Table of Contents
