Supervisor Workstations; Dial-Up Supervisor; Printers; Configuring Workstations - Northern Telecom NAC User Manual

18-2 International language support

Supervisor workstations

Dial-up supervisor

Printers

Configuring workstations

P0724352 Standard 1.0
All of the supervisor workstations, except the DEC VT220, provide full
international support. The DEC VT220 provides partial international
support by utilizing the terminal's DEC multinational character set. Refer to
the "Entering characters" section of this chapter for instructions on how to
enter international characters.
The dial-up supervisor feature is supported providing the person dialing
into the NAC Release 2 is using a NAC Release 2 supported supervisor
workstation. All language strings are displayed correctly on the remotely
logged in terminal or PC.
The following Hewlett Packard printers provide support for the
international characters in both tabular and graphical reports:
HP RuggedWriter (only in HP PCL mode)
HP PaintJet 3630
HP LaserJet series II
HP LaserJet series III
HP LaserJet series IV
HP LaserJet 4 Plus
HP DeskJet
HP DeskJet 500
HP DeskJet 560C
A workstation must be configured properly in order to have international
characters. If using a language specific keyboard, the workstation's
keyboard language must be configured.
November 1994