Table of Contents
Advertisement
5-4 Queue Statistics Display
P0724352 Standard 1.0
PF1=No selection
Removes the Commands pop-up window from the screen.
PF3=Configuration Control
Allows queue parameters to be modified through a pop-up window. The
following commands are available after pressing [Configuration Control]:
Change Network Day Routing Tables
Allows changes to be made to day target table for selected NACD
queues. The changes can be made in a pop-up window which appears
at the bottom of this screen. For more information, refer to the "Ad hoc
mode—day tables" section in the "Network Configuration Control ad
hoc mode" chapter.
Change Network Night Routing Tables
Allows changes to be made to the night target table for selected NACD
queues. The changes can be made in a pop-up window which appears
at the bottom of this screen. For more information, refer to the "Ad hoc
mode—night tables" section in the "Network Configuration Control ad
hoc mode" chapter.
View Miscellaneous Parameters
Displays the network link status and Meridian 1 configuration control
link status for the configured node on the display. This data appears in
a pop-up window at the bottom of the screen. For more information,
refer to the "Ad hoc mode—view miscellaneous parameters" section in
the "Network Configuration Control ad hoc mode" chapter.
PF3=No selection
Removes the configuration control pop-up window from the screen.
F6=Print
Prints a snapshot of the statistics display.
F7=Network Details
Provides a detailed graphical view of the status of the time-overflow calls
answered for a particular NACD-DN during the last 10 minutes of system
activity. For more information, refer to the "Network Details Display"
section in this chapter.
November 1994
Advertisement
Table of Contents
