Table of Contents
Advertisement
Supervisor Database Report
Fields
The Supervisor Database Report prints the information stored in the
supervisor database. This information is entered through the Supervisor
Definition feature, defined in the "Parameter Administration" chapter.
Selected Supervisor(s)
Enter the network supervisor ID(s) to appear on the report. This field
appears if Supervisor Database Report is entered in the Report Type field.
The information in the Selected Supervisor(s) field can be entered in one of
the three formats:
NNNN
Enter a single network supervisor ID (up to four digits) to produce a
report for one supervisor.
FFFF . . NNNN
Enter a range of network supervisor IDs, with the lowest and highest
values separated by two periods (. .). This produces a report that lists
all supervisors starting with the lowest number (FFFF) and ending with
the highest number (NNNN).
{ENTER}
Leave the field blank to produce a report covering all network
supervisors defined in the database.
Network Administration Center Supervisor's User Guide Product release 2
Network System Reports 9-7
Advertisement
Table of Contents
