Northern Telecom NAC User Manual page 98

Network administration center
Hide thumbs Also See for NAC:
Table of Contents

Advertisement

7-12 Network Report Definition
Day
Specifies the day(s) to be used to collect data for the report. Each day
begins at 00:00 and ends at 24:00.
A report cannot contain data for the current day until the day has ended.
However, reports can contain data for the current day that has been
gathered by a Meridian MAX node in a time zone where the day has
already ended. For example, consider a supervisor in Los Angeles who
wants a report on daily network trunk utilization. If this report is requested
at 11 p.m. on March 25, it cannot contain the Los Angeles statistics for
March 25 because they have not yet been tabulated. However, it can
contain the statistics from a node in Toronto, where the day has ended and
the daily statistics have been tabulated.
To produce a report with data from a previous day, enter a negative number
representing the number of days before the current day. For example, enter
–3 if the report is to be printed on Monday and include information from
the preceding Friday.
If the report is to use data from a specific date, enter the date using the
format yy/mm/dd. The date must be entered. The month must be entered if
it is different from the current month and if the year is specified. The year
must be specified only if it is different from the current year. For example,
enter 96/06/01 to use the information from June 1, 1996. Enter 06/01 to use
the information from June 1 of the current year. Enter 1 for the first day of
the current month and year. The NAC provides any information which is
not entered, such as the current month and year.
To select a range of days, type one of the above entries, followed by two
periods (..), followed by one of the above entries. For example,
96/06/01..96/06/07 produces a report from June 1, 1996 to June 7, 1996.
Enter –7..–1, to produce a report covering the seven days prior to the
current day. Make certain the first value is lower than the second value.
Leave the field blank to cover all the days.
P0724352 Standard 1.0
November 1994

Advertisement

Table of Contents
loading

Table of Contents