Table of Contents
Advertisement
Route
Specifies the route the report is to cover.
To select a range of routes, type the lowest route to be included, followed
by two periods (..), followed by the highest route. For example, enter 0..127
to produce a report on the routes starting with route 0 and ending with the
route 127. Make certain the first value is lower than the second value.
Leave the field blank to cover all the routes.
Note: In Meridian MAX 4.3x, Routes 0 to 127 are used by the system.
Route 255 is the internal route. In Meridian MAX 6, Routes 0 to 511
are used by the system. Route 9999 is the internal route.
Trunk
Specifies the trunk the report is to cover.
To select a range of trunks, type the lowest trunk to be included, followed
by two periods (..), followed by the highest trunk. For example enter 1..127
to produce a report on the trunks starting with trunk 1 and ending with
trunk 127. Make certain the first value is lower than the second value.
Leave the field blank to cover all the trunks.
Output Device
Directs the report to the VDT for previewing, or a selected printer for
printing.
If the default printer option is selected for this field, the report is sent to the
system default printer when the report is scheduled, or to the supervisor
default printer when generated on an ad hoc basis. If a supervisor default
printer is not assigned, the ad hoc report goes to the system default printer.
Press [Report preview] to view the report on the screen once it is ready.
Refer to the "Report Preview" chapter for details on displaying a report.
Language of Report
Determines the language used when the report is written and printed. This
language may differ from the one specified in the square brackets, at the top
right corner of the screen, which determines the language in which the
report name is entered. Neither of these fields appear on a unilingual
system.
Network Administration Center Supervisor's User Guide Product release 2
Network Report Definition 7-17
Advertisement
Table of Contents
