Table of Contents
Advertisement
Save as a new list definition
Saves the information currently on display as a new list definition. The
new list must have an unique list name. If an existing list definition
(and list name) is modified, the original list is not changed. However,
the changed list currently on display is saved under its new name.
Overwrite an existing list definition
Replaces the original information with any revisions. This command is
used when the original list is no longer required.
Delete an existing list definition
Removes a list from the system.
Print this list definition
Prints the list definition currently on display.
PF1=Select no command
Removes the Commands pop-up window from the screen.
PF2=Options
Provides a description or list of valid entries for the field.
PF2=Select no options
Removes the Options pop-up window from the screen.
PF3=Edit field
Allows a field to be edited.
PF3=End editing
Indicates that no further editing is required in the field.
F6=Insert Element
Inserts a list element between two existing list elements. The function key
is used primarily to insert an element in a logical place. For example, the
supervisor may wish to have the list of NACD-DNs in ascending numerical
sequence. The new element is inserted into the space occupied by the
selection bar. All subsequent elements are shifted down one spot on the list.
This function key cannot be used if the list is full. The list can contain a
maximum of 100 elements.
F7=Delete Element
Removes a single element from the list.
Network Administration Center Supervisor's User Guide Product release 2
List Management 14-3
Advertisement
Table of Contents
