Incoming Supervisor Messages; Accessing This Feature - Northern Telecom NAC User Manual

Incoming Supervisor Messages

Accessing this feature

Message number &
message sender
The Incoming Supervisor Messages feature views, stores, deletes, releases
and holds incoming supervisor messages. Up to 19 incoming messages can
be stored. Once this limit is exceeded, the system automatically deletes the
oldest message. However, up to five messages can be placed on hold. This
prevents them from being deleted.
To access this feature, press [Commands] on one of the following screens:
the initial Supervisor Messaging, Read Message, and Read Previous
Message. Press the "Show incoming" option from the Commands pop-up
window. Figure 17-6 shows three messages and the location of significant
pieces of information.
Figure 17-6
Incoming Supervisor Messages screen
Msg Waiting
Incoming Supervisor Messages
1 NAC Tue Nov 27 16:41:47 1990 STD *Urgent*
Please be advised that a severe snow storm has forced the closure of the
New York office. Inform your node(s) that there will be an increase in call
traffic by 16:45 (NAC time).
Sent by the Network Administrator.
2 Chicago Tue Nov 27 15:59:45 1990 STD Acknowledged
This node requires assistance from a network supervisor for the remainder of
the day, as one of our supervisors has suddenly taken ill.
Sent by the Nodal Administrator.
3 NAC Tue Nov 27 13:22:32 1990 STD Normal
Please note: All nodes must prepare their standard reports before 17:00
local time. Please submit these reports ASAP.
Sent by Network Supervisor 1000.
HELP=Help PF1=Commands PF2=Options
Network Administration Center Supervisor's User Guide Product release 2
Supervisor Messaging 17-15
Time stamp Message status
12:00:00
Message contents