Table of Contents
Advertisement
Network Configuration Control 12-11
To remove the entire list from the screen, move the cursor to the list name
and press [Delete list].
To make changes to individual entries in the list, move to the list terminator
and press [Expand list]. Once the list has been expanded, changes to
individual entries may be made. Pressing [Delete entry] while positioned
on an element in a list causes the entry to be removed and the list expanded.
PF3=No selection
Removes the NACD-DN Lists pop-up window from the screen.
F6=Sort by timer value
Re-orders the target table according to the time values. This function key
appears only if a change is made to the target table.
F10=Display Execution Queue
Displays the current contents of the network configuration control
execution request queue. This queue contains all requests for changes that
have been made. Refer to the "Execution Queue" section in this chapter for
more information.
Remove=Delete entry
Removes an entry from a list.
Remove=Delete list
Removes the entire list from the screen. This can be done by positioning
the cursor on the list name.
Remove=Expand list
Breaks the list into individual entries. This option appears while the cursor
is on the list terminator, shown as '======'.
Remove=Remove target
Removes a target from the table.
Fields
NACD-DN
Specifies the NACD-DN number or name to be changed. A NACD-DN,
NACD-DN list name, or an asterisk "*" can be entered. An asterisk
displays the information for all NACD-DNs.
Network Administration Center Supervisor's User Guide Product release 2
Advertisement
Table of Contents
