Table of Contents
Advertisement
17-18 Supervisor Messaging
Function keys
P0724352 Standard 1.0
Help=Help
Provides information regarding this feature and its fields.
PF1=Commands
The following commands are available by pressing [Commands]:
Exit
Returns the system to the initial Supervisor Messaging screen.
Delete Message
Deletes the message highlighted by the selection bar. The status for the
message changes to
Outgoing Supervisor Messages screen is exited.
Undelete Message
Restores the message highlighted by the selection bar, providing the
message was deleted (a message cannot be restored if it was not
deleted). The status for the message changes from
label assigned to it when it was created (for example, normal, urgent,
or acknowledge).
Hold/Release Message
Sets a toggle switch which either holds or releases a message. The
message status changes to
message, which is not on hold. After a message is released, the status
message changes from
was created (for example, normal, urgent or acknowledge). Up to five
messages can be placed on hold.
If certain messages are sent repeatedly, type them once and place them
on hold. In this way, the messages need only be typed once, and they
are always available.
PF1=Select no command
Removes the Command pop-up from the screen.
PF2=Options
Displays a description or list of valid entries for the field.
November 1994
. The message is not removed until the
Deleted
if this command is selected for a
HELD
to the status label assigned to it when it
HELD
to the status
Deleted
Advertisement
Table of Contents
