Northern Telecom NAC User Manual page 166

2 Use the arrow keys to move the cursor to a desired entry and press
{RETURN}.
A message, similar to the one shown in Figure 10-2, is displayed if the
selected Meridian MAX node is directly connected to the NAC. If the
Meridian MAX node is connected to the NAC via the dial-up modem,
the message does not offer the option of pressing "
The Meridian MAX login screen appears if the links between the node
and the NAC are intact and the user selects the correct terminal type.
(It may take a few minutes for the screen to appear.)
3 Enter the nodal supervisor ID when the Meridian MAX login screen
appears.
This must be the nodal supervisor ID associated with the Meridian
MAX. Do not enter the NAC ID.
Refer to one of the following guides for more information about the nodal
supervisor's capabilities and details on logging into the Meridian MAX:
Meridian MAX 4 Supervisor's User Guide (P0737511)
Meridian MAX 6 Supervisor's User Guide (P0802089)
Meridian MAX 6 Supervisor's Reference Guide (P0802091)
Network Administration Center Supervisor's User Guide Product release 2
Remote Supervisor Login 10-3
~. " to log out.