Table of Contents
Advertisement
F7=Delete Element
Removes a single element from the list.
Remove=Erase field
Removes the contents of a field.
Fields
Node—Control DN
One of the following can be added for each line of this feature:
CDN
To enter a CDN, use the format NNN-###-####, where NNN can be
either the three-digit node address or the three-character node short
name. The CDN can be entered as three to seven digits. The validity of
the Node CDN combination is not verified when entered. Any CDN
can only be in the Display CDN Selection feature once.
unit name
This is the name of a CDN unit created in the List Management feature
(described in the "List Management" chapter). Predefined units may be
used by selecting the "Read an existing Unit definition" in the
Commands pop-up window. If a unit name is used, all of the CDNs
assigned to the unit name also appear. The CDNs are followed by a
horizontal bar, which is followed by a line containing the unit name
and the consolidated statistics for the constituent CDNs. This choice
occupies more than one line. The unit lists are also appended to the
current display selection.
manually insert a total line
To manually insert a total line, place the cursor immediately below the
last item to be totalled and type the character, '='. Two lines are added,
a horizontal line and the totals. The total consists of all CDNs up to the
first blank line, which can be part of the current display page or a
previous display page.
blank line
A blank line is used to divide groups of CDNs/unit names.
Network Administration Center Supervisor's User Guide Product release 2
Parameter Administration 15-29
Advertisement
Table of Contents
