The Nac Workstation; Supervisor Workstations - Northern Telecom NAC User Manual

The NAC workstation

Supervisor workstations

This chapter is an introduction to the workstations used in the day-to-day
operation of the NAC.
Network supervisors use workstations to control the NAC. These
workstations display information on the screen, and transmit the
supervisor's instructions from the keyboard to the NAC.
Workstations, available to the NAC, can be separated into two categories:
personal computers (PCs) and video display terminals (VDTs).
PCs supported by the NAC 2 are the IBM PS/2 30, or the Compaq Deskpro
with:
PC/AT-style or PC enhanced-style keyboard
512 Kbytes of RAM
Paradise EGA or VGA card with 256 Kbytes of memory
either one 5.25 inch floppy disk drive, two floppy disk drives, or one
floppy disk drive and hard disk (3.5 in. or 5.25 in. disk drives can be
used)
serial communications port
PC-DOS/MS-DOS Version 5.0 or higher
Reflection 4+ software
Network Administration Center Supervisor's User Guide Product release 2
2-1