Network Configuration Control ad hoc mode
Accessing this feature
The Network Configuration Control ad hoc mode allows changes to be
made to queue parameters while in a real-time display. This ad hoc mode
can be accessed from four features: the Network ACD-DN Queue
Statistics, Network Details Display, Network Position Status Counts
Display, and the Nodal Control DN Queue Statistics.
Follow this procedure to use the ad hoc mode:
1
Access the Network ACD-DN Queue Statistics, Network Details
Display, Network Position Status Counts Display, or Nodal Control DN
Queue Statistics features.
2
Press [Configuration Control].
A pop-up window appears with three options. (The first two options are
not accessible from the Nodal Control DN Queue Statistics feature.)
a) Choose "Change Network Day Routing Tables" to set or change the
3
time overflow day routing table for each queue.
The Network Configuration Control–Day Tables display appears in the
bottom portion of the screen. See Figure 13-1.
b) Choose "Change Network Night Routing Tables" to set or change the
time overflow night routing table for each queue.
The Network Configuration Control–Night Tables display appears in the
bottom portion of the screen. See Figure 13-2.
c) Choose "View Miscellaneous Parameters" to view load management
link status and network link status in the network nodes.
The Network Configuration Control–View Miscellaneous Parameters
display appears in the bottom portion of the screen. See Figure 13-3.
Note that the "View Miscellaneous Parameters" option is the only ad
hoc mode accessible from the Nodal Control DN Queue Statistics
feature.
Network Administration Center Supervisor's User Guide Product release 2
13-1