Table of Contents
Advertisement
Schedule Definition
Accessing this feature
The Schedule Definition feature allows the supervisor to print scheduled
reports or execute configuration control change orders at specific times.
This feature, which is only available in network administration mode,
consists of three steps:
define the times and date the schedule is to run.
attach one or more reports to the schedule. This causes the reports to be
printed at the times and dates specified on the schedule.
attach one or more change orders to the schedule. This causes the
change orders to be executed at the at the times and dates specified on
the schedule.
This feature can be accessed in two ways depending on whether a password
is assigned in the Network Administrator Password field in the
Miscellaneous Options feature (described in the "Parameter
Administration" chapter).
If a password is assigned, the Schedule Definition feature appears dim on
the main menu indicating that its access is restricted. Refer to the "Entering
network administration mode" section in the "Getting started" chapter for
instructions on entering the password and accessing the network
administration mode.
If a password is not assigned, this feature is accessible to anyone who has
the Schedule Defn field set to enabled in the Supervisor Definition feature
(described in the "Parameter Administration" chapter). The Schedule
Definition feature does not appear dim on the main menu and can be
selected at any time.
Network Administration Center Supervisor's User Guide Product release 2
16-1
Advertisement
Table of Contents
