Table of Contents
Advertisement
2-6 The NAC workstation
Procedure 2-1 (continued)
Workstation configuration
Step
Installer's action and system's response
10
Press {ENTER} to begin transferring the appropriate Reflection 4+ terminal
configuration file from NAC to your workstation.
11
If the transfer of the configuration is successful, the system displays the following
prompts. If the transfer of the configuration is unsuccessful, go to Step 14.
Transfer of configuration file was successful.
From now on, use the following command when starting Reflection:
R4 MERIDIAN.CFG
If there are any key labels currently displayed at the bottom
of the screen, please press <Ctrl>+<Alt>+N to clear them.
12
If there are no function key descriptions on the screen then ignore this message. If
the bottom screen portion shows the function key descriptions, then press
{CONTROL}{ALT}{N} simultaneously. This action clears the descriptions from the
screen.
Please press <ENTER> to continue...
13
Press {ENTER} to complete the workstation's configuration. At the end of the
process the system displays the Supervisor Logon screen.
Go to Step 16.
14
The system displays the following prompt for an unsuccessful file transfer:
!!! Transfer of configuration file failed. !!!
Select an action from the following list:
>>> 1. Retry the transfer operation
2. Ignore the failure (a configuration file is available)
3. Select a different terminal type
Selection ––>
P0724352 Standard 1.0
—
continued
November 1994
—
Advertisement
Table of Contents
